PHYTEC

The phyCORE-MPC5200B-I/O is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale that boasts an array of flexible features of use in a wide range of automotive and mediacentric vehicle applications.  Features of the MPC5200B include: 760 MIPS of processing power, a double precision Floating Point Unit (FPU), integrated automotive networking (CAN, J1850), an MMU-based (Memory Management Unit) architecture with double data rate (DDR) memory support, integrated peripheral component interconnect (PCI), advanced technology attachment (ATA), universal serial bus (USB), multiple serial channels, up to three inter-IC sound (I2S) interfaces, and support for Ethernet.  The MMU supports operating systems, enables virtual memory management and facilitates the conversion of virtual addresses into physical addresses during direct access of runtime memory or external circuitry.  The FPU enables commands and calculations of floating point numbers.  In the absence of an FPU, such operations would otherwise be carried out by a compiler in processor operation using whole numbers.
The on-board Altera Cyclone II EP2C8BGA256 in-system-programmable FPGA with 8000 logic cells is another primary feature of the SOM subassembly.  This re-programmable FPGA reconfigures itself during run-time, according to user specifications based on device-level algorithms, and is able to achieve previously unattained processing speed and parallelism.  The FPGA can independently processes massive amounts of parallel information at a lower clock speeds than the MPC5200B processor.

• powerful Freescale PowerPC
• FPGA for quick I/O-processing
• integrated Update-Mechanism
• Long-time availability through automotive qualifiaction of the MPC5200B

Jump-start your development using our Rapid Development Kits. QuickStart-Instructions are your guide to success. Gather firsthand experience about processor performance and the quality of our hard- and software implementations. For any questions, please contact our support hotline.

• FPGA Rapid Development Kit (based on Linux)

The tab „Technical Details“ lists all standard variants available. Further configurations can be discussed upon request.
Please contact our sales team for more information and get pricing information, individually optimised for your project requirements.

function	TOP	Available	PCM-032-10RE8PSI	Remark
CPU		MPC5200	MPC5200
architecture		PowerPC	PowerPC
bus width		32bit	32bit
manufacturer		Freescale	Freescale
clock frequency		400MHz	400MHz
MMU		yes	yes
FPU		yes	yes
NOR flash		32MB..64MB	32MB
DDR RAM		64MB..128MB	128MB
EEPROM		4kB..32kB	4kB
serial		6	6
Ethernet	•	10/100Mbit/s	10/100Mbit/s	integrated Ethernet
USB Host		2	2
PCI	•	yes	yes	Rev. 2.2
CAN	•	2	2	integrated CAN x 2
I²C		2	2
SPI		1	1
PCMCIA/CF		1	1
JTAG		yes	yes
FPGA	•	Altera Cyclone 2	Altera EP2C8
RTC		yes	yes
power supply		3,3V	3,3V
dimensions		57mm x 84mm	57mm x 84mm
connector		Molex 0.635mm pitch	Molex 0.635mm pitch
number of pins		400	400
max. temperature range		-40..+85°C	-40..+85°C
Linux		yes	yes

Special Feature: We would like to point  these features out  as special to this produkt.

Certain combinations of options might not be configurable. Reasons herefor might be the pinmapping of the controller. (multiple usage of pins)

Hardwaremanual phyCORE-MPC5200B-I/O English (L-694e.pdf)

The following tables show the current implementation status of our software and a roadmap of future releases. If your project requires the availability of a specific feature at an earlier stage, please contact our sales team.

We invite you to use our new e-mail service to ensure that you will receive regular updates on our further developments in HW or SW for this product.
You will automatically receive the latest information via e-mail. As a result you will always be up-to-date throughout your development process.
To sign up, please register here.

Current Version: Version 2

Function	TOP	Details	available
base system			yes (since version 1)
Ethernet			yes (since version 1)
Nor flash			yes (since version 1)
UART			yes (since version 1)
CAN		SocketCAN	yes (since version 2)
FPGA	•	Linux Treiber zum Programmieren des FPGA	yes (since version 2)
I2C			yes (since version 2)
I2C EEPROM			yes (since version 2)
RTC			yes (since version 2)
Wolfson WM9712			yes (since version 2)
PCI	•		yes (since PD09.1.0)
USB Host			yes (since PD09.1.0)
AC97			from PD11.1.0
Audio			from PD11.1.0
IPCores	•		on request
SRAM			on request

Carrier board features required

Some combinations of options may not be used at the same time. This may result from limitations caused by architecture of the processors (e.g. multiple use of processor pins).

The PHYTEC phyCORE-i.MX31 Rapid Development Kit includes a Linux image pre-programmed in on-board Flash memory, offering all essential drivers and board-level feature support to jump start customer development.

To download:

Linux Board Support Package zum MPC5200B-I/O (Weiterleitung zum PHYTEC FTP-Server)