phyBOARD®- Nunki
Imaging kit

phyCAM P / phyCAM-S+ Development kit with NXP i.MX 6

  • NXP i.MX 6 quad core processor
  • Two independent camera inputs
  • CAN interface, Ethernet, SD card, 2x USB
  • Hardware H.264 video encoder
  • OpenCV and GStreamer im BSP, Halcon-Ready Image
  • Series-compatible camera module included
  • Pre-installed softwareBSP with integrated camera driver
  • Fast into series production: work with series components as early as the development phase

Kit contents:

  • phyBOARD Nunki i.MX 6 
    (ARM Cortex-A9, 4x 1 GHz, 1 GB DDR, 1 GB Flash)
  • VM-016-COL-M12 
  • Lens, M12 (S-Mount), f = 12mm
  • HDMI and LVDS connector, color, with touch
  • Embedded Linux BSP
  • Pre-installed software image with pre-installed camera driver
  • OpenCV, GStreamer software libraries preinstalled
  • software image with Halcon HPeek demo version as SD card image (download access)
  • USB cable (serial communication), camera cable 30 cm, plug-in power supply
  • LiveUSB stick with drivers, demos, examples
  • Extensive documentation, reference circuit diagrams
  • Commissioning guarantee


Develop your application with the phyBOARD Nunki with the variously supported NXP i.MX 6 processor. The four ARM Cortex A9 cores and integrated features such as an H.264 (1080p30) hardware encoder and the Vivante GC2000 GPU offer a solid platform for image processing.
The phyBOARD Nunki offers maximum flexibility in camera selection: Cameras with a parallel interface, LVDS interface or MIPI CSI-2 can be connected. through the phyCAM-S+ interface, cameras with longer cables can also be connected directly to the kit.

The kit is based on components suitable for series production that can be transferred directly to series production. This minimizes the development effort. The phyBOARD itself has also been developed for series production and can be used as a single board computer. Phytec offers a cost-effective development service for any adjustments. This kit is based on the phyCORE i.MX6 module, which has proven itself in harsh environments.

The kit includes the camera module VM-016-COL-P-M12. The camera is characterized by one Global Shutter and HDR mode off in wide temperature range.
For the standard configuration we have selected a phyCAM-P module with a monochrome sensor and WVGA resolution.
The camera is supplied with a mounted M12 lens holder and a lens with a focal length of 12 mm.
Our sales team will be happy to put together other configurations for you if required.

The board can be operated with 12 V-24 V and, in addition to other interfaces, has an Ethernet and two USB 2.0 interfaces as well as a CAN interface. The phyCORE i.MX 6 module is plugged in interchangeably. Commissioning can take place via a directly connected HDMI monitor.

The kit includes the LinuxBSP included in series quality. Drivers for the camera and interfaces as well as the image processing libraries OpenCV and GStreamer are in the BSP integrated. This is for a direct start BSP already installed ready for use.

Module phyCORE-i.MX 6
SOM Mounting Connector insertion
Processor i.MX 6Quad
Architecture ARM Cortex-A9
Frequency 4x 1 GHz
NAND Flash 1 GB
SPI NOR Flash 16 MB
Ethernet 1x 10/100/1000 Mbit/s
USB 1x Host, 1x OTG
Serial via microUSB
Digital I/O via Expansion Connector
PCle 1x miniPCIe
Mass Memory microSD Card Slot, SATA
Display HDMI, LVDS, Parallel
Audio via Expansion
Camera Interface 2x, both with phyCAM-P or phyCAM-S+ or one with MIPI CSI-2
Camera 1 MPixel color VM-016-COL-M12
Lens f=12 mm, M12
Expansion Bus USB, UMI, Power Control Signals (Reset, Power-Good...)
JTAG on Connector
User Control Elements Reset Button
Boot Source SD Card, NAND, eMMC, SATA, USB Host
RTC RTC with Gold Cap Backup
Power Supply 12-24 V
Connectors Samtec 0.5 mm pitch (280 pins)
Dimensions 150 mm x 75 mm
Temperature range -25°C to +85°C
Betriebssystem Linux 4.19.100
Distribution Yocto 2.7.4 (Warrior)

phyBOARD-Nunki Imaging Kit

Didn't find an answer? Just ask your question in Live Chat

phyBOARD-Nunki Development Kit

Item No. KPB-02301-001

phyBOARD-Nunki Embedded Imaging Kit

Item No. KPB-02301-Video-L01

phyBOARD-Nunki Thermal imaging kit

Item No. KPB-02301-Video-L03

symbol online shop.svg

Embedded Imaging Kit

Item No.: KPB-02301-Video-L01

Available variants:

295.00  plus VAT.

Due to the current component situation, you will receive the delivery date in the order confirmation


Add-on Item number Price Order
Display kit: AV adapter, 7 '' EDT display with capacitive touchKPEB-AV-02125.00 plus VAT.
plug-in power supply 12VSV02916.00 plus VAT.

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!


Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.

Do you have questions about an embedded topic? Arrange an online meeting now!


Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.