READY FOR PROJECT START

Update and Device Management Kit

Ready-to-use - device management and updates for embedded systems

  • Ready-to-use device for system updates with the 
    Connagtive IoT Device Suite platform 
  • Remote access to all devices via the Connagtive IoT Device Suite platform
  • Security by Design on the device, with the IoT Device Suite Platform and with data transmission
  • High reliability and globale Availability through the use of AWS cloud services
  • Possibility of using the device identity for individual extensions and own services, e.g. data acquisition using MQTT
  • Simple and transparent cost model based on pay per use

Advantages for the series:

  • Automatic registration of the devices for your customer account
  • Rollout of the final configuration and software using a pre-installed start system

Kit contents:

  • phyBOARD-Polis with phyCORE-i.MX 8M Mini module
  • Linux Yocto BSP
  • Pre-installed software image including driver
  • Device identity in the form of X509 certificates and private key in the TPM
  • On-boarding tool for independent registration of the device on the Connagtive IoT Suite platform
  • 3 months of use of the Connagtive IoT Device Suite platform from device registration
  • Ethernet cable
  • USB cable
  • 24 V power supply including connector set
  • Quick Start Instructions
  • Commissioning guarantee

Description:

The Update & Device Management Kit comes with the NXP i.MX 8M Mini modules based, industry-compatible phyBOARD polis available. The finished IoT gateway is also included in the Board Support Package phyGATE Tauri L .
The kit was developed jointly by PHYTEC and "The Embedded Security Experts" (ESEC). For this, the necessary tools for using the Connagtive IoT Device Suite have been integrated with a Trusted Platform Module (TPM).
The Connagtive IoT Device Suite developed by ESEC is a modular update & device management platform that is available worldwide through the use of Amazon Web Services (AWS).

The device included in the kit comes with a pre-installed A / B system, minimal embedded Linux and all the keys and X509 certificates required for use with the Connagtive IoT Device Suite.
With the pre-installed and menu-driven phytec-config-tool, a customer account is first created on the Connagtive IoT Device Suite platform and the device is then registered.
In this way, all data protection regulations are complied with and data is only exchanged with the Connagtive IoT Device Suite platform after you have given your consent.
After the successful registration you can carry out system updates via the platform. You can add further devices to your customer account yourself with the help of the phytec-config-tool. As a special service for series production, the devices can already be registered with PHYTEC for your customer account. This allows you to easily upload the final configuration and software to the devices using the Connagtive IoT Device Suite in your production facility or at the customer's premises.

Module phyCORE-i.MX 8M Mini
SOM Mounting FTGA
Processor i.MX 8M Mini Quad
Architecture ARM Cortex-A53 / Cortex-M4
Frequency 4x 1.6 GHz
SPI NOR Flash 64 MB
eMMC 8 GB
RAM 2 GB
EEPROM 4 kB
Ethernet 1x 10/100/1000 Mbit/s
WiFi 802.11 b/g/n (ac) 2.4 / 5 GHz
Bluetooth BLE 4.2
USB 1x USB2.0 OTG, 1x USB2.0
Serial 1x RS232 or RS485
Digital I/O optional via Expansion Connector
PCle 1x miniPCIe
Mass Memory microSD Card Slot
Display MIPI DSI or FlatLink LVDS via A/V connector
Audio SAI via A/V Connector, Voice Array Connector
Camera 1x MIPI CSI-2 (phyCAM-M)
Expansion Bus I²C, SPI, UART, JTAG, USB
JTAG via Expansion Connector
User Control Elements 1x reset button, 1x config switch
Boot Source eMMC, SD Card, NOR
RTC Real Time Clock (mounted on SoM) with Gold Cap Backup
Power Supply 12 V-24 V
Connectors 319 solder pads, 1.27 mm pitch Fused Tin Grid Array (FTGA)
Dimensions 100 mm x 100 mm
Temperature range -40°C to +85°C
Betriebssystem Linux 4.19.35
Distribution Yocto 2.7.1 (Warrior)

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

symbol online shop.svg

Update and device management
Development Kit


Item No.: KPB-02820-UDM

Available variants:

195.00  plus VAT.

Due to the current component situation, you will receive the delivery date in the order confirmation

Quantity:

SBC

Education + Training _ Use our know-how for your product development

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.

Do you have questions about an embedded topic? Arrange an online meeting now!

 

Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.