German 
English 
PHYTEC France 
PHYTEC USA 
PHYTEC India 
PHYTEC China Total amount:
plus VAT.
READY FOR PROJECT START
VM-016-L FPD Link III
Starter Kit
phyCAM ‑ L board-level camera incl. converter
on phyCAM ‑ M (MIPI CSI ‑ 2) interface
- Starter Kit for easy implementation of
phyCAM ‑ L solutions - FPD ‑ Link III standard
- Creation of a transparent MIPI CSI-2 channel
- Connection to all imaging boards with
phyCAM-M input - up to 15 m coaxial cable length (Power-over-Coax)
- Kit contents: 1 MP camera module VM ‑ 016 with FPD ‑ Link III interface, VZ ‑ 018: FPD ‑ Link III converter board phyCAM ‑ L / M with phyCAM ‑ M output (MIPI CSI ‑ 2), reference circuit diagrams, accessories
Kit contents:
- 1 MPixel FPD ‑ Link III camera module with M12 lens holder,
color or monochrome sensor - VM-016-COL-L-M12 or VM-016-BW-L-M12
- M12 lens (S-Mount), f = 12 mm
- phyCAM ‑ L to phyCAM ‑ M Bridge VZ ‑ 018
- super thin RG1.37 coaxial cable 1 m
- Extensive documentation, reference circuit diagrams
- Commissioning guarantee
Description:
This kit enables the VM ‑ 016 ‑ L board-level camera to be commissioned on any compatible embedded imaging kit. The phyCAM ‑ L interface connects the camera module and converter board via a single coaxial cable with a length of up to 15 m. Power-over-Coax means that no additional power supply cable is required.
On the receiver side, the converter board VZ ‑ 018 ensures conversion to MIPI CSI ‑ 2. It can be easily connected to a compatible embedded imaging kit via the phyCAM ‑ M interface.
The FPD‑Link III based phyCAM‑L interface is transparent for data transmission. After the initialization of the transmission path, the already im BSP integrated camera drivers for the VM‑016 module can be used.
The converter board has two phyCAM ‑ L inputs. Two camera modules can optionally be switched to the phyCAM ‑ M output. The power supply for the camera module can be provided directly from the computer board via the phyCAM-M interface or, if required, it can be fed in externally on the converter board.
The kit contains a highly flexible coaxial cable of type RG1.37, which is particularly suitable for internal wiring. It can be connected directly to the UMCC Gen.1 sockets of the camera module and converter board. Other cable types (e.g. RG174) can be used with the pigtail adapter (accessory). Adapters are available with SMA or FAKRA connectors.
For series use, the converter circuit is usually integrated on the base board. The necessary information and reference circuit diagrams are included in the kit.
Matching embedded imaging kits
- phyBOARD ‑ Pollux Imaging Kit
- phyBOARD ‑ Polaris Imaging Kit
- phyBOARD ‑ Polis Imaging Kit
- phyBOARD-Nunki Imaging Kit
The phyCONTROL ‑ Ain already has an on-board converter and can be connected directly to a phyCAM ‑ L camera module via a Fakra adapter.
| Resolution | 1280 x 800 (1 MPixel) |
| Color/Monochrome | -COL / -BW |
| Color Format (-COL/-W) | Bayer Pattern / Y |
| Interface | phyCAM-L (FPD-Link III) |
| FPD-Link III Serializer | TI DS90UB953 |
| Sensor Size | 1/4“ 3.84 mm x 2.4 mm |
| Pixel Size | 3 µm x 3 µm |
| Shutter Type | Global |
| Frame Rate (full-size image) | 60 fps (max.) |
| Frame Rate (Standard Video) | 66 fps (Full HD) |
| Dynamic Range | 63.9 dB |
| Features | I2C/ Power/ Strobe-Connector, EEPROM |
| Operating Voltage | 4.5 V… 13.2 V DC |
| Connector Type (Signal) | UMCC Gen1, Coaxial |
| Interface | 2 x phyCAM-L in, phyCAM-M out |
| Line Rate FPD-Link III | 4.0 Gbps per Rx-Port |
| Line Rate phyCAM-M | 4-lane, up to 1.6 Gbps per lane |
| Framerate | 5 MPixel @ 55fps |
| FPD-Link III Deserializer | TI DS90UB954 |
| Features | Power over Coaxial |
| Operating Voltage | 5 V … 12 V DC |
| Power Consumption (max.) | 1200 mW |
| Operating Temperature | -25°C … +70°C |
| Connector Type (Signal in) | 2 x UMCC Gen.1, coaxial |
| Connector Type (Signal out) | FFC/FPC 30 pin, 0.5 mm pitch |
| PCB Dimensions | 34 mm x 68 mm |
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
VM-016-COL-L starter kit: VM-016 + phyCAM-L to phyCAM-M Bridge, 1m coax. cable
Item No. VM-016-COL-L KIT
VM-016-BW-L starter kit: VM-016 + phyCAM-L to phyCAM-M Bridge, 1m coax. cable
Item No. VM-016-BW-L KIT
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions
In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Education + Training _ Use our know-how for yours Productsdevelopment
With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Do you have questions about an embedded topic? Arrange an online meeting now!
Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.
Other interesting topics:
