German 
English 
PHYTEC France 
PHYTEC USA 
PHYTEC India 
PHYTEC China Total amount:
plus VAT.
READY FOR PROJECT START
VM-020-L FPD Link III
Starter Kit
phyCAM-L board-level camera including converter
on phyCAM-M (MIPI CSI-2) interface
- Starter Kit for easy implementation of phyCAM-L solutions
- FPD-Link III – standard (V³ compatible)
- Creating a transparent MIPI CSI-2 channel
- Connection to all imaging boards with phyCAM-M input
- up to 15 m coaxial cable length (Power-over-Coax)
- Kit contents: 2 megapixel camera module VM-020 with FPD-Link III interface,
VZ-018: FPD-Link III converter board phyCAM-L/M with phyCAM-M output (MIPI CSI-2), reference circuit diagrams, accessories
Kit contents:
- 2.3 MPixel FPD-Link III camera module with M12 lens holder,
color or monochrome sensor - VM-020-C-L-03-S3 oder VM-020-M-L-03-S3
- M12 lens (S-Mount), f = 12mm
- phyCAM-L to phyCAM-M Bridge VZ-018
- super-thin RG 1.37 coaxial cable 1m
- Extensive documentation, reference circuit diagrams
- Commissioning guarantee
Description:
This kit enables the VM-020-L board-level camera to be used with any compatible embedded imaging kit. The phyCAM-L interface connects the camera module and converter board via a single coaxial cable up to 15 m in length. Power-over-coax eliminates the need for a separate power supply cable.
On the receiver side, the VZ-018 converter board provides conversion to MIPI CSI 2. It can be easily connected to a compatible embedded imaging kit via the phyCAM-M interface.
The FPD Link III-based phyCAM-L interface is transparent for data transmission. Therefore, after initializing the transmission link, the data already present in the BSP Integrated camera drivers are used for the VM-020 module.
The converter board has two phyCAM-L inputs. Two camera modules can be selectively connected to the phyCAM-M output. Power for the camera module can be supplied directly from the computer board via the phyCAM-M interface or, if required, externally via the converter board.
The kit includes a highly flexible RG1.37 coaxial cable, ideal for internal wiring. It can be connected directly to the UMCC Gen. 1 connectors on the camera module and converter board. Other cable types (e.g., RG174) can be used via pigtail adapters (accessories). Adapters are available with SMA or FAKRA connectors.
For series production, the converter circuit is typically integrated onto the baseboard. The necessary information and reference circuit diagrams are included in the kit.
Matching embedded imaging kits
- phyBOARD-Pollux Imaging Kit (i.MX 8M Plus)
- phyBOARD-Polis Imaging Kit (i.MX 8M Mini)
- phyBOARD-Nash Imaging Kit (i.MX 93)
- phyFLEX-i.MX95 Imaging Kit (i.MX95)
- phyBOARD-Izar RDK (AM68x)
The phyCONTROL ‑ Ain already has an on-board converter and can be connected directly to a phyCAM ‑ L camera module via a Fakra adapter.
| Resolution | 1920 x 1200 (2.3 MPixel) |
| Color/Monochrome | -C / -M |
| Color Format (-COL/-W) | Bayer Pattern / Y |
| Interface | phyCAM-L (FPD-Link III) |
| FPD-Link III Serializer | TI DS90UB953 |
| Sensor Size | 1/2.6“ 5.761 mm x 3.6 mm |
| Pixel Size | 3 µm x 3 µm |
| Shutter Type | Global |
| Frame Rate (full-size image) | 120 fps (max.) |
| Frame Rate (Standard Video) | 134 fps (Full HD) |
| Dynamic Range | 71.4 dB |
| Features | I2C/ Power/ Strobe-Connector, EEPROM |
| Operating Voltage | 4.5 V… 13.2 V DC |
| Connector Type (Signal) | UMCC Gen1, Coaxial |
| Interface | 2 x phyCAM-L in, phyCAM-M out |
| Line Rate FPD-Link III | 4.0 Gbps per Rx-Port |
| Line Rate phyCAM-M | 4-lane, up to 1.6 Gbps per lane |
| Framerate | 5 MPixel @ 55fps |
| FPD-Link III Deserializer | TI DS90UB954 |
| Features | Power over Coaxial |
| Operating Voltage | 5 V … 12 V DC |
| Power Consumption (max.) | 1200 mW |
| Operating Temperature | -25°C … +70°C |
| Connector Type (Signal in) | 2 x UMCC Gen.1, coaxial |
| Connector Type (Signal out) | FFC/FPC 30 pin, 0.5 mm pitch |
| PCB Dimensions | 34 mm x 68 mm |
VM-020-L FPD-Link III Starter Kit
Didn't find an answer? Just ask your question in Live Chat
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
VM-020-COL-L starter kit: VM-020 + phyCAM-L to phyCAM-M Bridge, 1m coaxial cable
Item No. VM-020-COL-L KIT
VM-020-BW-L starter kit: VM-020 + phyCAM-L to phyCAM-M Bridge, 1m coaxial cable
Item No. VM-020-BW-L KIT
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions
In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Education + Training _ Use our know-how for your product development
With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Do you have questions about an embedded topic? Arrange an online meeting now!
Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.
Other interesting topics:
