VM-009
phyCAM-S+
This camera board can be connected directly to a controller board with an LVDS camera interface.
- Color sensor
- 1,3 Megapixel
- CMOS sensor MT9M131
- Rolling shutter
Discontinued
LTB: 09.04.2021/XNUMX/XNUMX
Alternative camera module VM-016: phyCAM-S+
34 mm x 34 mm
1,3 MP rolling
The VM-009-LVDS camera board is equipped with the Aptina MT9M131 color CMOS sensor.
This sensor has an integrated preprocessing (IFP - image flow processor), which enables image correction and enhancement.
The SOC architecture also enables the conversion of data formats. This means that six different 8-bit data formats are available.
The VM-009-LVDS supports the direct output of RGB, YUV and Bayer pattern formats.
The camera board is connected to the serial phyCAM-S - Interface equipped. It can be connected directly to a controller board with an LVDS camera interface. PHYTEC offers this interface on controller boards from the phyCARD and phyFLEX families. The corresponding Basisplatinen are already equipped with the appropriate connector. On the software side, the corresponding camera drivers and demo programs for various PHYTEC controller boards are installed directly in the BSP provided.
The camera board can be supplied in three different housing variants: As a sensor board, with an M12 lens holder or with a C / CS mount bracket.
Resolution | 1280 x 1024 (1.3 MPixel) |
Color/Monochrome | -COL |
Color Format (-COL) | YUV, RGB, Bayer Pattern |
Interface | phyCAM-S (LVDS) |
Image Sensor (-COL/-BW) | MT9M131 |
Sensor Size | 1/3" 4.6 mm x 3.7 mm |
Pixel Size | 3.6 µm x 3.6 µm |
Shutter Type | Rolling |
Frame Rate (full-size image) | 15 fps (max.) |
Frame Rate (Standard Video) | 30 fps (VGA) |
Dynamic Range | 71 dB |
Features (optional) | Strobe / EEPROM |
Operating Voltage | 3.3 V DC |
Power Consumption (typ.) | 170 mW |
Power Consumption (max.) | 538 mW |
Connector Type (Signal) | Hirose 8 pin. |
Operating Temperature | -25°C…+70°C |
Lens Mount | plain sensor / M12 / C-CS |
Lens | optional, customizable |
PCB Dimensions | 34 mm x 34 mm |
Sensor Technology | CMOS |
Sensitivity | 1.0 V/lux·sec |
AEC | auto / manual |
AGC | auto / manual |
AWB | auto / manual |
Gamma Correction | yes |
ROI | yes |
Skipping | 2 / 4 |
Mirror Flip | yes |
Control Interface | I²C |
Interface Data Width | 8 Bit |
Data Format (Software) | YUV,RGB-565, RGB-555, RGB-444, Raw RGGB Bayer, Processed RGGB Bayer, ITU-R BT.656 |
Special Feature | integrated ISP |
Connector Type Trigger / Sync. | JST 3 pin |
Mounting Points | 4 x M2.5 |
Weight (PCB) | 7 g |
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
Our embedded experts are there for you!
Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!
Education + Training _ Use our know-how for yours Productsdevelopment
With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions
In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Other interesting topics: