The VM-010-LVDS camera board can be connected directly to a controller board with an LVDS camera interface.

  • Monochrome / color sensor
  • W-VGA
  • CMOS sensor MT9V024
  • Global-Shutter

34 mm x 34 mm

WVGA Global

This board is equipped with a CMOS sensor Aptina MT9V024 and supplies monochrome data with 8 bit gray level resolution or color data in Bayer pattern format with a resolution of 8 bit. Compared to the MT0V024, the MT0V022 has even better technical data.

The camera board VM-010-LVDS is equipped with the serial phyCAM-S - Interface equipped. It can be connected directly to a controller board with an LVDS camera interface. PHYTEC offers this interface on controller boards from the phyCARD and phyFLEX families. The corresponding Basisplatinen are already equipped with the appropriate connector.

On the software side, the corresponding camera drivers and demo programs for various PHYTEC controller boards are installed directly in the BSP provided.

Trigger and strobe signals to synchronize the camera can be connected via another three-pin connector.
The camera board can be supplied in three different housing variants: As a sensor board, with an M12 lens holder or with a C / CS mount bracket.

Resolution 752 x 480 (WVGA)
Color/Monochrome -COL / -BW
Color Format (-COL/-BW) Bayer Pattern / Y
Interface phyCAM-S+ (LVDS)
Image Sensor (-COL/-BW) MT9V024
Sensor Size 1/3“ 4.51 mm x 2.88 mm
Pixel Size 6 µm x 6 µm
Shutter Type Global
Frame Rate (full-size image) 60 fps (max.)
Frame Rate (Standard Video) 60 fps (WVGA)
Dynamic Range > 55 dB (linear)
High Dynamic Range > 80 bis 100 dB
Features (optional) Strobe / Trigger / EEPROM
Operating Voltage 3.3 V DC
Power Consumption (typ.) 330 mW
Power Consumption (max.) 660 mW
Power Consumption (Standby) 0.2 mW
Connector Type (Signal) Hirose 8 pin.
Operating Temperature -25°C…+85°C
Lens Mount plain sensor / M12 / C-CS
Lens optional, customizable
PCB Dimensions 34 mm x 34 mm
Sensor Technology CMOS
Sensitivity 4.8 V/lux·sec
AEC auto / manual
AGC auto / manual
Chief Ray Angle
ROI yes
Binning 2x2 / 4x4
Mirror Flip yes
Defective Pixel Correction yes
Control Interface I²C
Interface Data Width 8 Bit
Data Format (Software) Y8 (BW), 8 Bit RGGB Bayer (COL)
Connector Type Trigger / Sync. JST 3 pin
Mounting Points 4 x M2.5
Weight (PCB) 7 g

VM-010: phyCAM®-S+, monochrome, PCB version

Item No. VM-010-BW-LVDS

VM-010: phyCAM®-S+, monochrome, S mount

Item No. VM-010-BW-LVDS-M12

VM-010: phyCAM®-S+, monochrome, C/CS mount

Item No. VM-010-BW-LVDS-H

VM-010: phyCAM®-S+, color, PCB version

Item No. VM-010-COL-LVDS

VM-010: phyCAM®-S+, color, S mount

Item No. VM-010-COL-LVDS-M12

VM-010: phyCAM®-S+, color, C/CS mount

Item No. VM-010-COL-LVDS-H

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!


Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for your product development

With the know-how transfer from our experts to your developers, you will reach your goal faster!


Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.