The VM-012-BW-LVDS is equipped with ON Semiconductor's VITA 1300 monochrome CMOS sensor. This sensor has both Global- as well as rolling shutter (switchable).
The sensor has a very good light sensitivity of 4,6 V / lux-s and is also sensitive in the near infrared range (NIR).
The readout speed can also be increased by reducing the resolution. The camera can thus achieve a frame rate of 150 fps with VGA resolution. The user can define up to 8 ROI regions, whereby only the pixels required for the evaluation have to be transferred.
As with all phyCAM modules, all parameters such as exposure time, gain, etc. can be set using software.
The camera board is connected to the serial phyCAM-S+ - Interface equipped. It can be connected directly to a controller board with an LVDS camera interface. PHYTEC offers this interface for controller boards of the phyCARD and phyFLEX families. The corresponding carrier boards are already equipped with the appropriate connector.
On the software side, the corresponding camera drivers and demo programs for various PHYTEC controller boards are installed directly in the BSP provided.
This board is equipped with the monochrome version of the VITA 1300 (NOIV2SN1300A-QDC). The image data are output in Y8 / Y10 or optionally also Y12 format. The camera is designed for a wide temperature range from -25 ° C to + 85 ° C.
The camera board can be supplied in three different housing variants: As a sensor board, with an M12 lens holder or with a C / CS mount bracket.
|Resolution||1280 x 1024 (1.3 MPixel)|
|Color/Monochrome||-COL / -BW|
|Color Format (-COL/-BW)||Bayer Pattern / Y|
|Image Sensor (-COL/-BW)||Vita1300|
|Sensor Size||1/2“ 6.18 mm x 4.95 mm|
|Pixel Size||4.8 µm x 4.8 µm|
|Shutter Type||Global and Rolling|
|Frame Rate (full-size image)||37 fps (max.)|
|Frame Rate (Standard Video)||50 fps (HD)|
|Dynamic Range||60 dB|
|High Dynamic Range||90 dB|
|Features (optional)||Strobe / Trigger / EEPROM|
|Operating Voltage||3.3 V DC|
|Power Consumption (typ.)||620 mW|
|Power Consumption (max.)||660 mW|
|Power Consumption (Standby)||85 mW|
|Connector Type (Signal)||Hirose 8 pin.|
|Lens Mount||plain sensor / M12 / C-CS|
|PCB Dimensions||34 mm x 34 mm|
|AEC||auto / manual|
|AGC||auto / manual|
|ROI||yes, up to 8|
|Interface Data Width||8 Bit|
|Data Format (Software)||Y8 (BW), 8 Bit RGGB Bayer (COL)|
|Connector Type Trigger / Sync.||JST 3 pin|
|Mounting Points||4 x M2.5|
|Weight (PCB)||5 g|
Didn't find an answer? Just ask your question in Live Chat
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
We provide support in our free board support packages GStreamer, OpenCV and HALCON three well-known and successfully represented software libraries for image processing.
We constantly monitor the Product change notifications (PCNs) of our suppliers. In the event of component changes or cancellations, the timely procurement of alternatives is initiated.
you have an individual request for this product? Give us a call: +49 (0) 6131 9221 32
Our embedded experts are there for you!
Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!
Education + Training _ Use our know-how for your product development
With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions
In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Other interesting topics: