The industrial cameras of the USB-CAM series can be connected to any PC with a USB interface in just a few steps. A complex installation of additional hardware is not necessary. Power supply and data transfer take place via just one cable.
Thanks to the extremely compact metal housing with a size of only 36 x 36 x 25 (mm), the USB-CAMs can be installed in almost any installation location. It is fastened using four M3 threads or a supplied 1/4 "or M6 flange. The fastening holes are located on all four sides of the camera, so that even difficult installation situations can be mastered.
In practice, cameras with different resolutions are required depending on the task at hand. Previously, different camera models had to be selected and stocked for this.
The 5 megapixel camera from PHYTEC simplifies the selection:
Various sub-resolutions can be selected via software. In this way, the USB-CAM can be easily adapted to a wide variety of tasks.
A lower resolution can be achieved either by setting a readout window (ROI) or by combining pixels (binning).
The camera can be operated under Microsoft Windows10 and Linux. To use the cameras under Linux, please order using the "-UVC" option (example: "AK091-UVC").
As an option, the camera is also available with an external trigger input with which the recording time can be precisely controlled.
-Trigger cable USB-CAM (Hirose 4-pin to BNC): WK297 (Length = 3m)
Individual Extra Services:
|Resolution||2592 x 1944 (5 MPixel)|
|Color / Monochrome||monochrome|
|Shutter Speed||1/10.000 ... 1/4 sec|
|Interface||USB 2.0 High Speed|
|Image Sensor (-COL/-BW)||MT9V024|
|Sensor Size||1/3“ 4,51 mm x 2,88 mm|
|Pixel Size||6 µm x 6 µm|
|Frame Rate (full-size image)||60 fps|
|Frame Rate (Standard Video)||150 fps (QVGA)|
|Dynamic Range||> 55 dB (linear)|
|Features (optional)||external Trigger, Digital Out|
|Operating Voltage||5V via USB|
|Power Consumption (typ.)||1.25 W|
|Connector Type (Signal)||USB 2 Mini-B|
|Operating Temperature||-5°C ... 45°C|
|Dimensions||36 mm x 36 mm x 25 mm|
Didn't find an answer? Just ask your question in Live Chat
If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32
We provide support in our free board support packages GStreamer, OpenCV and HALCON three well-known and successfully represented software libraries for image processing.
We constantly monitor the Product change notifications (PCNs) of our suppliers. In the event of component changes or cancellations, the timely procurement of alternatives is initiated.
you have an individual request for this product? Give us a call: +49 (0) 6131 9221 32
Our embedded experts are there for you!
Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!
Education + Training _ Use our know-how for your product development
With the know-how transfer from our experts to your developers, you will reach your goal faster!
Participants in our training courses receive a solid knowledge of professional hardware and software development.
Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions
In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.
You will get a free insight into new hardware and software solutions and learn more about special offers.
Other interesting topics: