READY TO EMBED

phyBOARD®-Segin
i.MX 6UL / ULL

The SBC offers high computing power with low energy consumption and an excellent price-performance ratio.

  • Available with i.MX 6ULL-Y0 or i.MX 6UL-G2
  • Series-ready design, no further hardware expenditure
  • Extended interface subset via expansion
  • Simple middleware integration
  • Ethernet up to 2x 10/100 Mbit / s
  • Camera interface (phyCAM-P)

100 mm x 72 mm

ARM Cortex-A7

With the single board computer phyBOARDSegin The phyCORE-i.MX 100UL/ULL variants can be put into operation in Pico-ITX format (72 mm x 6 mm). The module is installed directly on the phyBOARDSegin soldered on. A number of signals from the i.MX 6UltraLite processor are routed to an expansion connector intended for plugging in custom circuits. These processor connections can easily be implemented by the customer himself. For the customer-specific compilation of an individual system, further interfaces are routed to connector strips, such as CAN, GPIOs, audio and touch.

Module phyCORE-i.MX 6UL/ULL
SOM Mounting Soldered (DSC)
Processor i.MX 6UL, i.MX 6ULL
Architecture ARM Cortex-A7
Frequency 792 MHz
NAND Flash 512 MB SLC
DDR3L RAM 512 MB
EEPROM 4 kB
Ethernet up to 2x 10/100BASE-T
Wi-Fi optional via Wi-Fi Adapter
Bluetooth optional via Wi-Fi Adapter
USB 1x Host, 1x OTG
Serial 1x RS-232 or RS-485
CAN 1x
MMC/SD/SDIO microSD card slot
Display 24-bit parallel (via optional display adapter PEB-AV-02)
Audio 1x stereo line In, 1x stereo, speaker line out
Camera 1x parallel (phyCAM-P)
Expansion Bus SPI, UART, SD, JTAG, CAN, GPIOs, ADC, Timer, Watchdog, Tampers
User Control Elements reset button, CPU ON/OFF buttons
Boot Source SD card, NAND flash
RTC Goldcap for SOM and on-board RTC
Power supply 12 V - 24 V via Power Adapter
Dimensions 100 mm x 72 mm (Pico-ITX format)
Temperature range -40 °C to +85 °C
Operating system Linux (Yocto based)

phyBOARD-Segin

Didn't find an answer? Just ask your question in Live Chat

phyBOARD®-Segin

Item No. PB-02013

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!

 

Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.