Digital Camera Module with 5 Megapixel resolution for direct connection with SOM interface (color).
VM-011-COL is equipped with the Aptina MT9P006 color CMOS sensor. Aptina's DigitalClarity technology offers outstanding image quality. The 5 megapixel resolution (2592H x 1944V) is designed for applications that require high-resolution images.
The integrated „windowing“ function allows for the resolution to be reduced and adjusted depending on the task. This feature offers the implementation of pan-and-scan without moving parts. In addition, complicated adjustments of the camera board during the implementation phase are no longer necessary.
Due to the reduced resolution, the readout speed can be increased. Therefore frame rate and enable the camera to capture HDTV (720p) video at 60 fps..
As for all phyCAM Modules, all parameters such as exposure time, gain and more can be adjusted via software.
VM-011-COL can connect directly to the parallel processor camera interface. All PHYTEC PCBs with phyCAM-P connection (e.g. all SOMs with OMAP and i.MX processor) can directly connect the sensor board with a cable. All camera drivers and demo programs are already implemented in the Board Support Package for the respective SOM.
This camera board is equipped with a color Aptina CMOS sensor MT9P006 Image data format is Bayer Pattern. Optional Y12 is available by jumper configuration.The camera is designed for an extended temperature range of -25°C to +70°C.
The camera module is available with three housing options: PCB-version (sensor only), with M12 or with C/CS-mount lens holder.
|Image Resolution (H x V)||2592 x 1944|
|Sensor Size||1/2.5“ 5.7 x 4.28 mm|
|Pixel Size||2.2 x 2.2 µm|
|Color / Monochrome||Color|
|Sensor Chip||Aptina MT9P006|
|Frame Rate, max (fps)||up to 15 fps (Vollbild), up to 60 fps (720p)|
|Dynamic Range||67.74 dB|
|Ext. Trigger / Sync.||Trigger / Strobe|
|Binning||2x2 / 4x4|
|Data Format||8 / 10 Bit parallel|
|Interface Mode||8/10 Bit RGGB (Bayer)|
|Supply Voltage||2.8 V|
|Power Consumption||450 mW|
|Standby Power||2 mW|
|Lens Mount||none / M12 / C-CS|
|Dimensions (mm)||34 x 34|
|Mounting||4 x M2.5|
|Operating Temperature||-25 to 70°C|
|Signal Output||FFC 33 pol.|
|Trigger / Sync.||FFC + JST 3 pol.|
Pricing plus VAT
See here for VM-011 phyCAM-P Color Download section.