phyBOARD®- Nunki
i.MX 6Quad

This SBC is ideal for applications with two cameras.

  • i.MX 6Quad ​​with 4x 1 GHz
  • Camera: 2x parallel / 2x serial / MIPI CSI
  • 4-port USB hub onboard
  • GB Ethernet
  • SATA
  • HDMI

150 mm x 72 mm

ARM Cortex-A9

Phytec has designed the phyBOARD-Nunki especially for image processing applications - a further development of our proven phyBOARD-Mira. It makes optimal use of the two Image Processing Units (IPU) of the i.MX 6Quad ​​processor and is suitable for applications with multiple cameras - from intercom applications with moving images to applications in quality control where, for example, a thermal imaging camera and a conventional color camera are used, to to stereoscopic applications.

For this purpose, the single board computer has five physical camera interfaces: two parallel phyCAM-P interfaces, two serial phyCAM-S+ Interfaces and a MIPI camera interface. Two camera interfaces can be used in parallel. Additional interfaces and a 12 V - 24 V power supply have also been integrated on board.

Module phyCORE-i.MX 6
SOM Mounting Connector insertion
Processor i.MX 6Quad
Architecture ARM Cortex-A9
Frequency 4x 1 GHz
NAND Flash 1 GB
SPI NOR Flash 16 MB
Ethernet 1x 10/100/1000BASE-T
USB 1x Host, 1x OTG
Serial via microUSB
CAN 1x
Digital I/O via Expansion Connector
PCle 1x miniPCIe
MMC/SD/SDIO microSD Card Slot
Display LVDS, Parallel, 1x HDMI
Audio via Expansion Connector
Camera 2x, both with phyCAM-P or phyCAM-S+ or one with MIPI CSI-2
Expansion Bus USB, UMI, Power Control Signals (Reset, Power-Good...)
User Control Elements Reset Button
Boot Source SD Card, NAND, eMMC, SATA, USB Host
RTC RTC with Gold Cap Backup
Power supply 12 V - 24 V
Dimensions 150 mm x 75 mm
Temperature range -25 °C to +85 °C
Operating system Linux (Yocto based)


Didn't find an answer? Just ask your question in Live Chat


Item No. PB-02301

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

Our embedded experts are there for you!


Secure your personal consultation appointment quickly, easily and free of charge.
30 minutes exclusively for you and your project!

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!


Participants in our training courses receive a solid knowledge of professional hardware and software development.

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.