READY FOR PROJECT START

VM-017-L FPD Link III
Starter Kit

 

phyCAM ‑ L board-level camera incl. converter
on phyCAM ‑ M (MIPI CSI ‑ 2) interface

  • Starter Kit for easy implementation of
    phyCAM ‑ L solutions
  • FPD ‑ Link III standard
  • Creation of a transparent MIPI CSI-2 channel
  • Connection to all imaging boards with
    phyCAM-M input
  • up to 15 m coaxial cable length (Power-over-Coax)
  • Kit contents: 5 MP camera module VM ‑ 017 with FPD ‑ Link III interface, VZ ‑ 018: FPD ‑ Link III converter board phyCAM ‑ L / M with phyCAM ‑ M output (MIPI CSI ‑ 2), reference circuit diagrams, accessories

Kit contents:

  • 5 MPixel FPD ‑ Link III camera module with M12 lens holder,
    color or monochrome sensor
  • VM-017-COL-L-M12 or VM-017-BW-L-M12
  • M12 lens (S-Mount), f = 12 mm
  • phyCAM ‑ L to phyCAM ‑ M Bridge VZ ‑ 018
  • super thin RG1.37 coaxial cable 1 m
  • Extensive documentation, reference circuit diagrams
  • Commissioning guarantee
     

Description:

This kit enables the VM ‑ 017 ‑ L board-level camera to be commissioned on any compatible embedded imaging kit. The phyCAM ‑ L interface connects the camera module and converter board via a single coaxial cable with a length of up to 15 m. Power-over-Coax means that no additional power supply cable is required.

On the receiver side, the converter board VZ ‑ 018 ensures conversion to MIPI CSI ‑ 2. It can be easily connected to a compatible embedded imaging kit via the phyCAM ‑ M interface.
The FPD‑Link III based phyCAM‑L interface is transparent for data transmission. After the initialization of the transmission path, the already im BSP integrated camera drivers for the VM‑017 module can be used. 

The converter board has two phyCAM ‑ L inputs. Two camera modules can optionally be switched to the phyCAM ‑ M output. The power supply for the camera module can be provided directly from the computer board via the phyCAM-M interface or, if required, it can be fed in externally on the converter board.

The kit contains a highly flexible coaxial cable of type RG1.37, which is particularly suitable for internal wiring. It can be connected directly to the UMCC Gen.1 sockets of the camera module and converter board. Other cable types (e.g. RG174) can be used with the pigtail adapter (accessory). Adapters are available with SMA or FAKRA connectors.

For series use, the converter circuit is usually integrated on the base board. The necessary information and reference circuit diagrams are included in the kit.

Matching embedded imaging kits

  • phyBOARD ‑ Pollux Imaging Kit
  • phyBOARD ‑ Polaris Imaging Kit
  • phyBOARD ‑ Polis Imaging Kit
  • phyBOARD-Nunki Imaging Kit

The phyCONTROL ‑ Ain already has an on-board converter and can be connected directly to a phyCAM ‑ L camera module via a Fakra adapter.

Resolution 2592 x 1944 (5 MPixel)
Color/Monochrome -COL / -BW
Color Format (-COL/-W) Bayer Pattern / Y
Interface phyCAM-L (FPD-Link III)
FPD-Link III Serializer TI DS90UB953
Sensor Size 1/2.5“ 5.7 mm x 4.3 mm
Pixel Size 2.2 µm x 2.2 µm
Shutter Type Rolling
Frame Rate (full-size image) 55 fps (max.)
Frame Rate (Standard Video) 120 fps (Full HD)
Dynamic Range 40 dB
Features I2C/ Power/ Strobe-Connector, EEPROM
Operating Voltage 4.5 V… 13.2 V DC
Connector Type (Signal) UMCC Gen1, Coaxial
Interface 2 x phyCAM-L in, phyCAM-M out
Line Rate FPD-Link III 4.0 Gbps per Rx-Port
Line Rate phyCAM-M 4-lane, up to 1.6 Gbps per lane
Framerate 5 MPixel @ 55fps
FPD-Link III Deserializer TI DS90UB954
Features Power over Coaxial
Operating Voltage 5 V … 12 V DC
Power Consumption (max.) 1200 mW
Operating Temperature -25°C … +70°C
Connector Type (Signal in) 2 x UMCC Gen.1, coaxial
Connector Type (Signal out) FFC/FPC 30 pin, 0.5 mm pitch
PCB Dimensions 34 mm x 68 mm

VM-017 FPD-Link III Starter Kit

Didn't find an answer? Just ask your question in Live Chat

If you have any questions, please contact our technical sales department directly: +49 (0) 6131 9221-32

VM-017-COL-L starter kit: VM-017 + phyCAM-L to phyCAM-M Bridge, 1m coax. cable

Item No. VM-017-COL-L KIT

VM-017-BW-L starter kit: VM-017 + phyCAM-L to phyCAM-M Bridge, 1m coax. cable

Item No. VM-017-BW-L KIT

Online seminars _ Helpful embedded knowledge explained in a nutshell in short video sessions

In informative online seminars with our experts and partners, we will inform you about exciting topics from the embedded industry.

You will get a free insight into new hardware and software solutions and learn more about special offers.

Education + Training _ Use our know-how for yours Productsdevelopment

With the know-how transfer from our experts to your developers, you will reach your goal faster!

 

Participants in our training courses receive a solid knowledge of professional hardware and software development.

Do you have questions about an embedded topic? Arrange an online meeting now!

 

Within 30 minutes you will learn new solutions for your project.
You can also secure exclusive offers after your conversation.